[amsat-bb] Re: Voltage Requirements of ICOM IC-910H
Rick Vidmar - K9KK
K9KK at earthlink.net
Sat Jan 20 12:39:44 PST 2007
Considering what the 910 costs---I would recommend something like the
MFJ-4225MV which you can hold in the palm of your hand, produces no
electrical noise, has a tiny fan, and best of all it is over-current and
That is what I'm using for my 910H and as I recall it is only $150 or so.
----- Original Message -----
From: "Michael Hatzakis Jr MD" <lists at hatzakis.net>
To: <amsat-bb at amsat.org>
Sent: Saturday, January 20, 2007 2:25 PM
Subject: [amsat-bb] Voltage Requirements of ICOM IC-910H
>I am changing my supply for my ICOM IC-910H because my PS-30 is dying. I
> have an SGC PS-50 supply that is not regulated, per se, it is a huge
> with massive transformers. It appears to work fine, but I am worried
> the fact that is starts at 16v or so.
> Specifically, is 15.5 to 16v too high to safely run this radio and is a
> of 1-1.5 volts too much unregulation for proper operation?
> Michael K3MH
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB