[amsat-bb] Re: Ham HT and SkyCommand

Eric Christensen eric at christensenplace.us
Mon Feb 26 03:47:15 PST 2007

Can you change memory channels on the 2000 from the remote end?  I'm
thinking that you could easily setup a bunch of channels with the
frequencies for Doppler correction and then be able to change the
channel remotely to fix your Doppler shift.  Again, speculating as I'm
not aware of the capabilities from the remote end.

Eric W4OTN

Fred A Parker wrote:
> I have experimented using a TS-2000 for remote Satellite operation.    I put the TS-2000 in the Wireless Remote Control Mode, Sky Command could be used with the a Kenwood HT.   Setting the TS-2000 to receive the downlink from AO-51 and retransmit it on 145.550.   The remote station uses a simple ground plane and transmits directorially to the bird and listens for the downlink on 145.550.   The main problem with this is to control the TS-2000 the remote station has to change frequency to 145.550.
> Fred 
> _______________________________________________
> Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

More information about the AMSAT-BB mailing list