[amsat-bb] Re: APRS on ISS, PCSAT, and PCSAT2
Armour, Randy (ITS)
Randy.Armour at nashville.gov
Sun Sep 10 09:00:05 PDT 2006
Many thanks to Walter K5WH.
I successfully digipeated through PCSAT2 at the 11th hour! I had simply chosen an incorrect uplink frequency from the Amsat satellite status page.
Kenneth - N5VHO and Jerry K0HZI also provided valuable insight. It is very much appreciated.
Randy - KI4LMR
From: amsat-bb-bounces at amsat.org on behalf of Armour, Randy (ITS)
Sent: Sat 9/9/2006 4:55 PM
To: amsat-bb at amsat.org
Subject: [amsat-bb] APRS on ISS, PCSAT, and PCSAT2
I will apologize in advance as this question has probably been asked several times already. I am attempting to digi-peat through PCSAT, and PCSAT2 with an Arrow handheld and Kenwood D7A. Having no trouble using APRS on the ISS, I hope to be able to do the same with PCSAT and maybe even get through PCSAT2 before decommission.
I can decode packets from PCSAT and PCSAT2, but never get a packet through either system. PCSAT had a 90 degree pass this morning, with no luck. I am suspicious that my packet path is incorrect, or I don't have enough power to reach the receivers.
Packet path is ARISS,APRSAT,SGATE,WIDE. I was recently told that only ARISS was needed for PCSAT, PCSAT2, and ISS. Having no luck yet and time growing short for PCSAT2, I am hoping to get a definitive answer from the list. What is the correct packet path? Can I make it with such limited equipment as a handheld beam and 6 watt HT?
Thanks in advance,
Randy - KI4LMR
Sent via AMSAT-BB at amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
More information about the AMSAT-BB